/*
MosFet
Turns on and off a T010111 LED Module connected to O0,
when pressing a T010020 MosFet attached to I0.
This example code is in the public domain.
created in Dec 2011
by Federico Vanzati
This example code is in the public domain.
*/
// include the TinkerKit library
#include <TinkerKit.h>
TKButton btn(I0); // creating the object 'led' that belongs to the 'TKLed' class
// and giving the value to the desired output pin
TKMosFet mos(O0); // creating the object 'mos' that belongs to the 'TKMosFet' class
// and giving the value to the desired output pin
void setup() {
// TinkerKit 'object' eliminate the need for pin declaration with pinMode()
}
void loop()
{
// check if the pushbutton is pressed
if(button.get() == HIGH) { // if it is, the button.state() is HIGH
mos.on(); // turn MosFet on
}
else{ // if it is not, the button.state() is LOW
mos.off(); // turn MosFet off
}
}
