/*
Analog input, analog output, serial output
Reads an analog input pin, and T000140 Rotary Potetiometer Analog Sensor connected to I0,
and uses the result to set the brightness on a T010111 LED Module connected on O0.
Also prints the results to the serial monitor.
created 29 Dec. 2008
Modified 4 Sep 2010
by Tom Igoe
modified 7 dec 2010
by Davide Gomba
modified on Ded 2011
by Federico Vanzati
This example code is in the public domain.
*/
#include <TinkerKit.h>
TKPotentiometer pot(I0);// creating the object 'button' that belongs to the 'TKButton' class
// and giving the value to the desired input pin
TKLed led(O0); // creating the object 'led' that belongs to the 'TKLed' class
// and giving the value to the desired output pin
int brightnessValue = 0; // value read from the pot
void setup() {
// initialize serial communications at 9600 bps
Serial.begin(9600);
}
void loop() {
// read the analog in value:
brightnessValue = pot.get();
// set the led brightness
led.brightness(brightnessValue);
// print the results to the serial monitor:
Serial.print("brightness = " );
Serial.println(brightnessValue);
// wait 10 milliseconds before the next loop
// for the analog-to-digital converter to settle
// after the last reading:
delay(10);
}
